Guitar tuner
This tuner listens to your guitar with the microphone of your computer, tablet or phone, and tells you whether each string is too low, too high or in tune. It works in your browser, for free, with no account and no download. The sound is analyzed on the spot and then forgotten: nothing is recorded or sent.
Loading the tool…
How to use it
- Press Enable the microphone and accept your browser's permission request.
- Find a quiet place, then pluck an open string, letting it ring.
- Read the result: the name of the note, the string number, the measured frequency and the deviation in cents.
- Watch the needle. If it is on the left, the string is too low: tighten it. If it is on the right, the string is too high: loosen it.
- When the needle reaches the center of the gauge, the tool displays "In tune!"
Tune the strings one after the other. If nothing happens, check in your browser's address bar (lock or microphone icon) that it is allowed for this site. Another program already using the microphone can also block it.
The strings offered
The tuner matches the standard tuning of the six-string guitar, from low to high: E, A, D, G, B, E (strings 6 to 1). The reference A is set to 440 Hz.
You can choose between two modes:
- Auto : the tool finds by itself the string closest to the note it hears. This is the simplest.
- A specific string : touch the button of the string you want to target it. The tool then plays the reference note, and measures the deviation from that string only. If the sound it hears clearly resembles another string, it tells you.
The button Hear the note plays an example of the targeted string, to help you find the pitch to reach.
What is a cent?
A half step, that is, the gap between two neighboring piano keys, is divided into 100 cents. The gauge goes from −50 to +50: it therefore covers one half step in all, a quarter tone on each side. A string is considered in tune when it is within 5 cents of the target note. Such a deviation is barely perceptible to the ear; beyond that, the string starts to sound out of tune.
Tips for tuning well
- Pluck firmly, then let it ring. The first moments of a string are the messiest: the tool settles a little after the attack.
- One sound at a time. If the other strings vibrate, mute them with your hand.
- Approach the note from below. It is often more stable to start a little below, then tighten gently. A string you have just stretched can drift back down: check it a second time.
- Check at the end. Replay the strings one after the other, then a chord: if something sounds out of tune, start over with the faulty string.
- Avoid noise. Television, fan or voices drown out the guitar and disturb the measurement.
Frequently asked questions
The tool doesn't react, why? The signal may be too weak: move the guitar closer to the microphone or pluck harder. The result fades after about one second of silence, which is normal.
Can I tune something other than a guitar? The tool only offers the six strings of a guitar in standard tuning. For another instrument, a drone on the desired note, played at the same time as the instrument, also lets you tune by ear.
Does the sound of my guitar come out of the speakers? No, the microphone is only analyzed. The only sound produced is that of the reference note, when you ask for it.